We fix what's broken, fast, and we don't disappear after the invoice. Priority scheduling available across Selmer and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC didn't start as a franchise chasing volume. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
We're not interested in being the cheapest quote on the page — we're the team that shows up in the truck, not a subcontractor we've never met. We carry the credentials Selmer inspectors and property managers expect to see, and we keep that documentation available on request for every job, residential or commercial.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Too many homeowners in Selmer have a story about a tech who showed up late, quoted one price, and charged another. That's the gap we built Leonard HVAC to close. We track arrival windows, callback rates, and repeat-issue complaints internally so problems get caught before they become patterns, because a customer who trusts us once tends to call us again — and Selmer is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Selmer dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Selmer homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services rooftop units and package systems across Selmer, with service agreements built around your operating hours.
Our commercial techs are trained to work around your customers and staff, scheduling noisy or disruptive work outside peak hours whenever possible.
Most emergency breakdowns start as a small, ignorable warning sign months earlier. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Selmer households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
Details vary by job type and are always shared upfront, never buried in fine print.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
If anything feels off after we leave, one call gets a tech back to your Selmer address.
Catching these signs early usually means a same-day repair instead of an emergency call at the worst possible moment.
Ignoring new noises is one of the fastest ways to turn a small repair into a major one.
This is one of the most common complaints we hear on service calls across Selmer.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
You'll know the cost before a wrench touches your system.
Emergency calls get moved to the front of the line automatically.
Parts and labor are backed by warranty terms explained in plain language.
Every technician carries current state licensing and manufacturer training.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
Every review below reflects an actual service call in the Selmer area.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. No pressure to buy a whole new system when a repair was all we needed."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. Never once felt like I was being upsold on something I didn't need."
"Had a full system replacement done and it was the smoothest home project I've had in years. Followed up a week later just to check everything was still running fine."
"As a property manager, having a company that actually answers after-hours calls is rare. Documentation for our records was thorough and easy to file."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Would use them again without hesitation."
"The tech walked me through what he was checking as he went, which I really appreciated. This is the company I'm saving in my phone now."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Selmer's seasonal swings.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Selmer area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Handles the majority of Selmer installs and specializes in properly sizing equipment for older housing stock.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Works directly with Selmer property managers to schedule around business hours.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Every technician we send is licensed in accordance with Selmer, TN requirements and carries full liability coverage.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
Our dispatch area extends throughout the greater Selmer region and nearby towns within Selmer, TN.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Yes, we service systems regardless of who originally installed them.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
From the older, established streets near the center of Selmer to the newer developments on the outskirts, our trucks cover the full footprint of the city.
If you manage several units or a shared system across a Selmer property, ask about setting up a standing service account so every request gets handled under one consistent agreement.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Selmer installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Selmer proper and into the nearby zip codes listed below.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
