Our Selmer-based crews carry the parts and the know-how to get your air moving again today. Same-day appointments available across Selmer and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC grew one honest service call at a time in communities like Selmer. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Selmer, TN.
You won't find us buried under layers of call-center scripts — we're the team that shows up in the truck, not a subcontractor we've never met. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, residential or commercial.
Selmer's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Selmer is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Selmer dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Selmer homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services multi-zone commercial buildouts across Selmer, with priority response for facilities that can't afford downtime.
Property managers working with multiple Selmer locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Selmer households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Details vary by job type and are always shared upfront, never buried in fine print.
We quote a flat rate before work begins and that number doesn't change once you approve it.
A technician doesn't consider the job done until the system is tested and performing correctly.
Catching these signs early usually means a same-day repair instead of an emergency call at the worst possible moment.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
If some rooms stay hot or cold no matter what the thermostat says, the system may be struggling to distribute air evenly.
A tune-up often identifies exactly what's driving the extra energy use.
This is one of the warning signs we recommend not waiting on.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
If something isn't right after we leave, we come back and make it right.
Our techs recognize brand-specific quirks instead of learning your system on the job.
Photos and plain-language notes accompany every diagnostic.
Maintenance plan members get priority scheduling and discounted rates.
A snapshot of the feedback that keeps us accountable.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. Fixed on the first visit and explained everything in terms I could actually understand."
"Signed up for the annual plan after our first repair and it's paid for itself already. You can tell these guys actually know what they're doing."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. New system is noticeably quieter and our energy bill actually dropped."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Documentation for our records was thorough and easy to file."
"The estimate matched the final invoice exactly, down to the dollar. Would use them again without hesitation."
"Diagnosed a failed capacitor and had it swapped within the hour. This is the company I'm saving in my phone now."
After thousands of service calls across Selmer, a handful of causes show up again and again.
Homeowners who schedule a tune-up ahead of each season tend to call us far less often for emergency repairs. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Selmer area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Runs point on overnight and weekend emergency calls throughout Selmer.
Works directly with Selmer property managers to schedule around business hours.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Our policy is simple: you approve the number before we touch the system.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Every technician we send is licensed in accordance with Selmer, TN requirements and carries full liability coverage.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
If you're unsure whether your address falls in our service area, a quick call to +1-866-805-8548 will confirm it.
Our commercial team handles rooftop units, multi-zone systems, and facility contracts alongside our standard residential repair work.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
We'd rather quote it honestly on the phone than have you feel ambushed by the bill.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
If you manage several units or a shared system across a Selmer property, ask about setting up a standing service account so every request gets handled under one consistent agreement.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Selmer installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Selmer, TN and near Selmer, there's a strong chance we already service your street.
Property managers with multiple Selmer addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
